Be Sure That Your Battery Is Safe Just By Keeping It Clean

Ever tried to jump start your car battery and was surprised that it was covered in gunk? That particular gunk that goes all over the battery is corrosion formed by acid condensation. You can easily clean this by using a simple chemical solution. A typical household product, specifically baking soda, can clean battery acid very easily. You'll want to take some safety measures, but safe cleaning of your battery is simply following a few instructions.

You will need to first get the supplies you need, most of which are located in your home. Protection glasses are nice to have for safeguarding your eyes, a box of baking soda is a necessary ingredient, adjustable pliers and screwdriver, with insulated handles, and a stiff-bristled brush to begin with. You will also need open-end and box wrenches, a scraper either metal or plastic, cleaning brushes for the battery terminal along with a turkey baster or small funnel. You should likewise have a number of sponges, spray-type household cleaner, rubber gloves in addition to a bucket of clean water. This may seem like numerous things for cleaning a battery, but we did point out doing it safely.

Because the corroding deposits contain sulfuric acid, it is advisable to use rubber gloves and the safety glasses. You'll want to always keep this substance away from your car, because it can eat away the paint. How much you have to clean the battery is determined by how much corrosion it has. To be able to fully get rid of the dirt and corrosion, you will need to take the battery out of the vehicle. The initial step is to try using the scraper to remove as much dirt as possible and use the bristle brush to get at more.

The next thing to complete will be to mix one tablespoon of baking soda with one pint of water then use it to clean the battery and the cable connections using the turkey baster. You then utilize the brush to remove the surplus deposits plus be sure to disconnect the cables for easier cleaning. When you are disconnecting the battery pack, be sure to use the pliers or wrenches to loosen the connection and pull them off with negative first then positive. For other elements of the battery, use the brush to remove the deposits then rinse with the baking soda solution.

If you can still find some dirt and grease remaining, use the spray household cleaner and sponge to get rid of them. Right after, dry every one of the you can try here parts and reassemble everything and be sure you hook up the cable with positive first. Finally, as soon as everything is secured and correctly put together, you will now have a safe and clean battery.

Leave a Reply

Your email address will not be published. Required fields are marked *